Track Chain Excavators KOMATSU PC300-6: Fitment and Replacement Guide

To fit a track chain to a KOMATSU PC300-6, confirm the excavator’s exact configuration and compare the existing chain’s link count, pitch, and track-shoe width before ordering. The model name alone is not enough to guarantee compatibility: undercarriage parts can differ by serial number, prior repairs, and installed components. We recommend confirming measurements against the machine or removed chain and having the supplier verify the part before production or shipment. This guide explains what to check, how to prepare a replacement inquiry, and how to reduce avoidable fitment risk.

Read more

Key Takeaways

• Verify the machine serial number and undercarriage configuration; do not rely on the model name alone.
• Record the chain link count, pitch measurement, and shoe width, then compare them with the current assembly.
• Confirm whether you need a bare chain, a chain assembly, or additional undercarriage components.
• Ask the supplier to confirm fitment, scope, packaging, and delivery terms in writing before placing an order.

Who This Guide Is For

This guide is for fleet owners, equipment dealers, maintenance teams, and parts buyers sourcing a replacement track chain for a KOMATSU PC300-6. It is especially useful when the machine works far from a dealer network or when the existing undercarriage has been repaired or modified. If you are comparing suppliers, the checks below can help you provide the information needed for a reliable quotation. They are not a substitute for the machine’s parts information or a supplier’s fitment confirmation.

Track Chain Fitment: The Basic Context

A track chain is the linked assembly that travels around the excavator’s undercarriage and engages with the drive sprocket. It supports the track shoes and works with components such as the sprocket, idler, rollers, and tensioning system. Replacing only the chain may be appropriate when the surrounding parts remain serviceable and compatible, but worn or mismatched components can affect installation and operation. Inspect the complete undercarriage before deciding what to order.

Chain Options and Replacement Scope

Suppliers may offer a chain assembly alone or a package that includes related components, depending on the requested configuration. Buyers should clarify whether track shoes, bolts, master links, or other parts are included rather than assuming they come with the chain. Construction and material details can also vary by supplier and product specification, so request the relevant technical details for the proposed part. Match the replacement to the machine’s existing arrangement and working requirements, not to a generic description.

How to Confirm KOMATSU PC300-6 Fitment

The most dependable approach combines machine identification with physical measurements. Start with the serial number and available parts information, then compare the existing chain and track shoes with the supplier’s proposed specification. If the undercarriage has been changed previously, measurements and photographs can help identify a configuration that differs from the original equipment listing. Ask the supplier to resolve any mismatch before confirming the order.

Step-by-Step Measurement and Information Checklist

1. Identify the machine. Record the KOMATSU PC300-6 model designation and complete serial number from the machine plate. Share the country or region of operation if relevant to the parts inquiry, and mention any known undercarriage replacement history.
2. Count the links. Count the links on the chain being replaced and record the total in links. Check the opposite side as well, because previous repairs may mean the two sides are not identical.
3. Measure chain pitch. With the chain safely accessible and suitable measuring equipment, measure center-to-center across 5 consecutive pin intervals in millimeters, then divide that distance by 5 to calculate the average pitch. Record how the measurement was taken and avoid measuring a damaged or visibly deformed section.
4. Record shoe width. Measure the track shoe across its width in millimeters and note the shoe style and condition. This helps the supplier understand the assembly currently installed and whether shoes are part of the requested scope.
5. Document the undercarriage. Send clear photographs of the chain, master-link area, shoes, sprocket, and machine identification plate. Include close-up images of visible wear or damage so the supplier can ask focused follow-up questions.
6. Confirm the proposed part. Request written confirmation of the part scope and fitment basis before payment or production. Compare the supplier’s offered details with your measurements and available machine parts information.

Measurements to Include in Your Inquiry

Choosing the Right Replacement

Use a selection process that checks compatibility, condition, and purchasing requirements together. First establish whether the chain is a direct replacement for the current setup or whether other parts have to be changed at the same time. Then define the intended application, expected operating conditions, and whether you want chain only or a broader undercarriage package. A clearly defined scope makes supplier quotations easier to compare.

Zhonghai Jiuchuan contains other products and information you need, so please check it out.

Application and Condition Considerations

Ground conditions and operating practices influence undercarriage wear, but they do not establish a specific chain specification by themselves. A machine working on abrasive, rocky, or muddy ground may need a different maintenance focus than one used mainly on firm, prepared surfaces. Tell the supplier how the excavator is used and describe any unusual wear pattern, but base fitment on confirmed dimensions and parts information. When related components are worn, ask whether replacing only the chain is appropriate for your situation.

Common Fitment and Purchasing Mistakes

• Ordering by model name only: the machine designation may not resolve serial-number or configuration differences.
• Assuming both sides match: previous repairs can leave different components on the left and right sides.
• Measuring one damaged area: worn or distorted links may produce a misleading pitch measurement.
• Leaving package contents unclear: confirm whether shoes, bolts, master links, or other parts are included.
• Skipping written confirmation: keep the supplier’s stated fitment basis and product scope with the purchase documents.

Pricing, MOQ, and Lead Time

Track chain pricing depends on the confirmed configuration, order quantity, material and product specifications, and whether related components are included. Minimum order quantities and production or shipping lead times are supplier-specific, so we do not recommend relying on general estimates for a particular PC300-6 order. Ask for a quotation that separates product scope, quantity, packaging, delivery terms, and any applicable tooling or customization requirements. If you have a required delivery window, state it when requesting the quote so the supplier can confirm feasibility.

Supplier Evaluation Checklist

Before choosing a supplier, check whether they request enough information to assess fitment rather than quoting from the model name alone. A capable supplier should be willing to clarify what is included, explain the fitment basis, and identify information still needed to confirm the part. Ask how the chain will be identified and packaged, what inspection or product documentation is available, and how discrepancies are handled before shipment. Evaluate the clarity and completeness of the response alongside price and delivery terms.

Working with Zhonghai Jiuchuan

At Zhonghai Jiuchuan, we support B2B buyers sourcing steel track-chain products and related undercarriage solutions. For a KOMATSU PC300-6 inquiry, send the machine serial number, link count, measured pitch, shoe width, photographs, required quantity, and destination. We can use those details to review the requested configuration and clarify product scope before preparing a quotation. Final fitment should be confirmed against the machine and the agreed product specification before installation.

Conclusion: Confirm Before You Replace

A replacement track chain for a KOMATSU PC300-6 should be selected by verified configuration, not by model name alone. Record the serial number, link count, average pitch in millimeters, and shoe width in millimeters, then compare those details with the existing undercarriage and supplier proposal. Before ordering, confirm the package contents, fitment basis, quantity, MOQ, lead time, and shipping terms in writing. To request a quotation from Zhonghai Jiuchuan, prepare those measurements and clear photographs so we can review your requirement and advise on the next sourcing step.